Posted By: Stuart Sweet December 2, If not, the team at Solid Signal can help you find the right dish for your needs. The Slimline-3 dish is all you need in most markets. The Slimline-5 dish is used for commercial installations and for some international installations. In addition to receiving signals from the three main locations, it also receives signals from the location which is used for some standard definition channels in some markets, and for some channels used only in commercial installation.
The Slimline-5 dish can be identified by a wider LNB, the front part of the dish. Even if you currently use a Slimline-5 dish you may not need more than a Slimline-3 dish. Most dishes today have a single wire coming from them instead of the traditional four wires. SWM-enabled dishes come in Slimline-3 and Slimline-5 varieties. The DSWM30 multiswitch supports up to 30 devices in two banks of It is recommended for commercial use.
It also allows 4K service to be combined with international satellite service. The SWM-8 multiswitch supports up to 8 devices find out more and distributes the signal on a single wire that can be split to make installation easier. Those are on Also most of the Spanish channels are on There is nothing on The sat is Standard Def channels, this will be all your core Directv channels.
Thanks folks for all the good answers. I'm good for now. Sep 10, 0 In the woods. B DirecTV-3 was removed from service in Oct and sent to a storage orbit as an on-orbit backup. It returned to service in having been leased to Telesat, which used the satellite as backup for its troubled Nimiq-2 at 82 degrees West under the designation Nimiq-2i. In the satellite was moved to back up Nimiq-1 and is now operated under the name Nimiq C DirecTV-6 went out of service August 15, and sent to a graveyard orbit having suffered damage from a solar flare in April as well as other solar array and power fluctuation problems.
Previous Next. Users who are viewing this thread. Total: 1 members: 0, guests: 1. Similar threads. Replies 18 Views 51K. Aug 16, Jimbo. Locked Which Satellite Does Directv use? Replies 13 Views 16K. Sep 5, PMKS. Replies 5 Views 23K. Nov 14, raoul Locked Does Directv use splitters? Replies 7 Views 6K. Sep 24, stellar Replies 1 Views Apr 28, jdspencer. If the installed system is older, contacting the company to upgrade to the newer receivers is the easiest method to upgrade the entire system.
Many times, it becomes necessary for a DirecTV customer to have to adjust the DirecTV dish after a bad storm or if accidently bumping the satellite dish. The need for an adjustment becomes readily apparent due to a sudden loss of signal quality of the television programming.
If this happens to your installation, it will require an adjustment to the dish to restore service. Step 1 — Determine if you are physically able to access the dish to conduct the adjustment. If you are, then you an likely accomplish the adjustment without having to pay for a service call. Write the information down for the required elevation, skew, and azimuth.
This indicates how weak or strong the signal that is being received. Step 4 — Arrange for a family member or a friend to monitor this screen while you go outside to adjust the Triple LNB. To avoid repeated trips, it is best to setup a means of communication such as a portable radio or cell phone while conducting the adjustment. Step 5 — Verify the line of sight between the DirecTV dish and the satellite the dish is aiming at. You will want to check for anything that is newly blocking the path to the sky such as a fallen tree or structure before making any adjustments to the dish.
If the issue is something that can be removed such as a tree, you can simply remove the debris and the signal strength will be restored. If there is a new structure, you will need to find a new location for the dish that does not block the view to the satellite. Step 6 — Borrow, buy, or rent a compass that displays the direction in numbers 0 to Step 7 — Turn the satellite dish in the appropriate direction left or right until you have it pointed to the appropriate azimuth coordinate.
Step 8 — Tilt the DirecTV dish either up or down to obtain the proper elevation. There are a series of numbers located on the mounting pole of the dish that represents a coordinate that can be used for the elevation setting. When the arrow on the back points to the elevation coordinates listed on the TV screen you have obtained the correct elevation setting for the dish.
There will be numbers located around the edge of the dish which represent the coordinates for the skew. Rotate the antenna until the arrow located on the side of the dish points to the right skew number from the TV screen.
Sometimes when your DirecTV system is malfunctioning, a message will appear on your television screen Your email address will not be published.
Let us know what you have to say:. Save my name, email, and website in this browser for the next time I comment. My service provider recommended to us a mono block LNB. Which dB gives better result?
0コメント